How to Keep Your Fireplace Burning All Night

How to Keep Your Fireplace Burning All Night

If you want to become an expert when it comes to starting and maintaining a wood fire, you should know how to keep it burning all night. When you use heat on a wood-burning stove, the controls of the wood are helpful when it comes to speeding up and slowing down the burn. However, if you want longer burns in the wood stove, you should control the size and shape of your wood. You will learn how to keep the wood burning all night. The large pieces of firewood are packed tightly to extend the burn and make it last all night.

Aside from calling a chimney repair to make sure everything is running smoothly; you will need the tips here.

 Remove the Old Ash

If you are new to wood stoves, the primary thing you need to do is to get rid of any old ash. This is going to give you enough space to start another fire. It is going to keep your stove clean. When you remove ash, you should wear heat-proof gloves. They are going to protect you from accidentally burning yourself by touching the hot coals. You should also make sure that the fire should be burned out completely before you begin to remove it.

Most of the time, when the ash is turning white, it is going to be burnt out and it will not be valuable. That is why it is best to get it from the stove. Use a brush or metal dustpan to clean the ash.

The Damper Should be Fully Open

In case there is a damper in the fireplace, you have to make sure that it is fully open before you start any fire.

An open damper helps to ensure that the chimney produces a maximum draw, which lets in more fresh air so it can get sucked into the fireplace from the room.

If there is a damper on your fireplace, it will normally be located at the chimney’s base, within the fireplace’s top inside. You can open the damper when you use the handle to extend it far enough.

Load Logs

You should carefully and gently rake the coals towards the front of the fire with a shovel from the accessories tool kit. When you use quality wood, you should choose logs that have a maximum size. For instance, if your wood heater is freestanding, like the radiant heater, choose logs that are up to 350 mm. If your model is larger, choose logs that are 500mm.

Using the tongs and poker, you should carefully place the logs at the back of the wood-burning heater. Place some small sticks along the logs, and rest one end in the coals at the front of the heater so that the larger logs will ignite.

Warm up the Chimney

The cold air that is trapped within the chimney causes issues when you light a fire in an open fireplace. The cold air that is trapped in a chimney pushes down the fireplace and prevents waste air from leaving. This can prevent fresh air from getting sucked into the fire.

If the fire is not hot enough to warm up the air within the chimney, it causes a fire to go out soon after it was started.

While warm air does not warm up the air within the chimney, it can cause a fire to exit just after it was started.

While warm air rises and cold air sinks down, the chimney can warm up before starting the fire.

This post first appeared on https://www.firstclasschimneyservices.com

Leave a Reply

Your email address will not be published. Required fields are marked *

(877) 959-3534