Category: Uncategorized

The chimney walls in a fireplace used for wood burning leads to accumulation of soot and debris which must be cleaned away. Tar and creosote build-up are flammable and leads to fire hazard. Chimney cleaning logs claim offer a cleaning alternative for the fireplace and chimney by hand which seems to be laborious task. The logs help to decrease and loosen the creosote build-up but it’s not as effective as a professional chimney sweeping helps.

Chimney-Cleaning Log Claims

A chimney cleaning log proves helpful when you burn it in fireplace. Burning a wood fire leads to softening of the tar build up in the chimney and makes chimney cleaning more effective. This leads to release of chemicals that adhere to chimney walls, loosens the tar and reduce the chances of fire.

When to clean Chimney?

Although, there is no rule on how frequent to clean a chimney. No one can make a schedule depending on the years of service or number of fires you had in the fireplace. Chimney inspection plays an important role to determine if a cleaning is required.

How to Inspect Chimney

While doing a chimney inspection, use your fireplace poker or other device to scrap away the creosote from the fireplace lining. If the creosote buildup is very thin then it rules out the requirement of cleaning. If the buildup is 1/8 of an inch then schedule a cleaning. A buildup of more than 1/8 to ¼ inch requires immediate cleaning. If it’s more than ¼ inch then make sure not to use the fireplace till it has been cleaned properly.

Source of Creosote

Creosote is nothing but the leftover of wood burned in the fireplace. Different types of wood leave variety of creosote buildup and piling up leads to increase in creosote and it should not be used in your fireplace.

Importance of Chimney Cleaning

The presence of creosote in the chimney leads to inefficiency. The rise in the level of creosote buildup increases the chances of flue fire. It can be very dangerous and can be avoided by keeping your chimney clean and chimney relining.
Although there are various types of do-it yourself cleaning instruments and home cleaning kits to clean the chimney but make sure to follow the directions given. It is better to initiate the cleaning process after the fireplace and chimney are completely cool and hire a chimney contractor for efficient cleaning.

This post first appeared on https://www.firstclasschimneyservices.com

It’s been raining and now it’s windy. It’s the perfect
combination for problems with the chimney. If you’re feeling wind coming down into
your fireplace, the chimney
cap could be the source.

One of the best ways to know for certain is for a Superior
Chimney certified chimney technician to take a look. Here’s why:

• It blocks the wind from inducing downdrafts
• It prevents rainwater from getting into the chimney
• Animals are on the go. Let’s prevent them from making their way into the chimney for shelter
• Leaves and debris are flying around on these windy days. Let’s keep it from accumulating

Get the chimney cap checked
today by calling 877-244-6349.

We’re an essential business provider.
Read our statement
as to what this means to you.

This post first appeared on https://www.superiorchimney.net

A crackling fire in the fireplace is a common sight in millions of homes during the winter.  It provides warmth and comfort while helping to keep heating costs down. With proper maintenance and good safety practices, your fireplace will provide years of enjoyment. However, a lot can go wrong when you neglect to clean your chimney regularly.

Risk of a Chimney Fire

One hazardous by-product of burning liquid and fossil fuel is creosote. It’s a carbon chemical compound that sticks to the walls inside the chimney. It continues to build up with every burn. When creosote is not removed through regular chimney cleanings, it becomes a dark, tarry, and highly flammable substance. A spark inside the chimney from a hot ember is all it takes to ignite a fire. Every winter, there are over 70,000 house fires, resulting in millions of dollars in property damage, injuries, and even deaths.  The overwhelming majority of residential structure fires, approximately 30%, are caused by excessive creosote in the chimney, according to the National Fire Protection Association (NFPA).

Exposure to Carbon Monoxide

Your chimney must be free of obstructions to vent smoke and fumes. It’s not uncommon for leaves, twigs, and small animals such as squirrels and birds, to find their way inside the flue, especially during the colder months. The debris and nests can cause an obstruction, hindering the venting of carbon monoxide and other toxic gases. Instead, the gases will be forced back into your home, where they can cause adverse health effects. These blockages can also restrict airflow into the fireplace. Inefficient burning will result in increased pollution and higher energy costs.

It Can Make You Sick

The soot, creosote, and other particles of dirt that continue to accumulate inside the chimney can reduce your indoor air quality and emit an unpleasant odor in your home. It can even make you sick. Breathing in many of these contaminants can lead to a variety of health issues. Some of the symptoms you may experience include itching of the eyes and skin, headaches, nausea, and respiratory problems, to name a few. Prolonged exposure to an unclean chimney can also increase the risk of skin and lung cancer.

Mold

When homeowners neglect to clean the chimney, they also miss out on an opportunity to notice signs of water leaks. A warm and humid flue are ideal conditions for mold. It can quickly multiply into millions of tiny spores that can spread throughout your home. Besides health issues and chimney damage, mold can also cause damage to walls, ceilings, and other surfaces around the house.

Professional Chimney Cleaning

The Chimney Safety Institute of America (CSIA) and national fire safety experts recommend homeowners have annual chimney cleanings and inspections. If it has been more than a year since your last chimney cleaning, it is time to hire a professional chimney sweep.  It is the best way to ensure your fireplace and chimney will keep your home and family safe.

 

The post What Can Happen If You Go Too Long Without Cleaning Your Chimney appeared first on Fluesbrothers Chimney Service.

Dirt is often on our minds in spring and it’s partly for the purpose of cleaning to improve indoor air quality. A common question that arises is whether a dirty chimney can make you sick or is it safe to leave it as is? Good question because threats to your wellness do lurk in dirty chimneys every season of the year. Read on to learn some of the ways dirty chimneys make you sick and the symptoms associated with those illnesses.

Creosote

What makes chimneys the dirtiest is creosote, a highly flammable, tar-like substance deposited in chimney flues with every wood fire. The toxic combustion materials created by wood fires don’t all go up and out of the chimney. Some amount is always left behind, and it is what’s called “creosote.” There are three primary dangers associated with creosote: Chimney fires, toxic poisoning, and various health issues associated with making direct contact and breathing in particles of the brownish-black gook.

Chimney Fires

A chimney fire is when the creosote or other material inside a chimney flue is ignited and burns inside the chimney. Thousands of house fires are started every year because of a dirty chimney filled with creosote. When the creosote is thick on the walls of a chimney liner, it continuously fuels a chimney fire. The heat often intensifies to the extent that the flue is destroyed, resulting in a life-threatening house fire.

Toxic Poisoning

Combustion gases from solid-fuel appliances are toxic, and it is very dangerous when they leak into the home. One of the gases is deadly carbon monoxide. A dirty chimney can cause you to breathe these dangerous fumes in the following ways:

• As a chimney fire is burning, a tremendous amount of combustion gases will usually billow back into the home, exposing occupants to carbon monoxide. Because it is odorless, tasteless, invisible, and symptomless, carbon monoxide is known as the “Silent Killer.” Because of this serious threat, it is vital to have a working carbon monoxide detector in the home when using gas and wood-fueled heating appliances.
• If your chimney liner has so many layers of creosote that the chimney becomes obstructed, toxic fumes flow back into the home instead of going outside. It’s important to realize that a smoky fireplace means you are exposed to these toxic gases.

Once the symptoms of carbon monoxide poisoning begin having an effect, an exposed person may experience any or all of the following:

• Dizziness
• A dull headache
• Shortness of breath
• Weakness
• Blurred vision
• Confusion
• Nausea
• Vomiting
• Loss of consciousness

Carbon monoxide exposure results in death if a person doesn’t escape the fumes and get to some fresh air. People who survive sometimes experience debilitating health problems from carbon monoxide exposure.

Creosote Exposure

Your household is exposed to the creosote in your chimney when there isn’t a good seal created by the damper. If you were to try do-it-yourself chimney cleaning, which experts do not recommend, you would likely come into direct contact with creosote. Because you don’t have the same equipment professionals have, a DIY effort could result in excessive creosote in the air of your home. Exposure to creosote can cause the following health problems:

• Irritation to the respiratory system, including the potential for severe respiratory issues
• Inflammation of the mouth, nose, and throat
• Rashes, lesions, and other types of skin irritation
• Eye irritation
• Vision damage, if it gets directly in your eyes and you rub your eyes
• Abdominal discomfort
• Mental confusion
• Long-term exposure to creosote can cause kidney and liver problems, seizures, and skin cancer

Schedule chimney cleaning with the trusted experts at Northeastern Chimney, Inc. We are located in West Hartford, CT. If you want to help ensure the good health of your family by getting your dirty chimney cleaned, call us today at 860-233-5770.

This post first appeared on https://www.mychimney.com

Chimney maintenance is imperative if you own a fireplace. Deadly fires, chemical poisoining and expensive chimney repair are some of the serious consequence associated with lack or ignorance of chimney maintenance. Whether you want to know more about these dangers or whether you want to know as what to expect with chimney cleaning then read on to know some of the essential things:

Chimney Fires

Smoke goes up in the chimney in case of fire. Some of the smoke condenses in the form of creosote on the flue. Creosote is a hard tar-like substance formed in the chimney with time. Whenever a thick coat of this substance catches fire then it leads to a frightening chimney fire. The chances of creosote formation are more when the fire is lit for the first time. A cold chimney leads to more condensation of smoke on the chimney flue. So, a continuous fire will usually filthy a chimney slowly than other types of fires.

Chimney fires are very hot and it leads the surrounding walls and rafters break open into flames. The fire open out at such a rapid speed that firefighters seems to be too late to reach the destination. The high temperature fire also leads to cracks to appear in the chimney and the flue. Whenever, any fuel is burned inside your fireplace, wood or gas stove or furnace it generates carbon monoxide. Normally,these harmful fumes vent up safely through the chimney but if the chimney leakage occurs then the fumes captures the home.

Chimney Maintenance Tips

The Chimney Safety Institute suggests that if you use fireplace or woodstove more than thrice in a week then make sure to hire a chimney contractor for chimney cleaning and inspection at least once in a year.
Normally, a comprehensive chimney maintenance costs around $298. The location of your house, timing of the year and the soot level of the chimney fluctuates this price. Regular chimney sweeping keeps the costs under control and prevent the chances of major chimney repairs that can cost several dollars.

Furnace Flue

Make sure to clean your furnace flue every time along with chimney cleaning. Although, furnace flues are less prone to creosote formation, still they get fouled with chlorine and sulfur. The accumulation of these chemicals leads to the formation of a powerful acid to eat away the flue.

Chimney Liners

Most of the new chimneys have in-built chimney liners. These liners can be of metal, cement or tile and helps to create an airtight path for your chimney. It helps to increase the area between the heat and the combustible surfaces like rafters. It also provides extra protection from fire and prevents water to enter into the masonry work, where it might damage the chimney by freezing. All the efficient furnaces use chimneys with appropriate sized liners. So,maintain your chimney with timely chimney inspection and repair and keep your family safe and secure.

This post first appeared on https://www.firstclasschimneyservices.com

As many are working from home and dealing with kids and pets
running around, homeowners have shared with us how the fireplace has brought comfort
and a smile to their home.

“Since our days remain chilly, I use the fireplace as a
way to get the kids to sit in one place. They enjoy doing activities in our
family room, and I’m able to get something done.”

“I do my yoga, then sit in front of the fireplace for
quiet meditation.”

 How do we know this?

Since people are working from home, our certified
technicians are in full swing with spring chimney sweeps. Homeowners
have had an opportunity to get to tasks that normally get pushed off, like cleaning the fireplace,
or a fireplace sweep.
Here are a few things homeowners have noticed about their fireplace:

• The fireplace or chimney has a strong-smelling
  odor
• The damper isn’t closing and opening properly
• “I swear I heard some noises”
• There’s greasy creosote on the side walls of the
  chimney
• The fire isn’t burning the way it did before

While our chimney technicians are at your home, you’re sharing
with us some new experiences.

“I have never used my gas fireplace this much. It’s
really nice. I think I will use it more now.”

“I really enjoy the sound of wood crackling. It’s very
relaxing.”

Outside

However, some other homeowners have taken a different
approach. They are walking outside their home just looking around getting fresh
air. When they look at the top of their house, the chimney gets their
attention.

“I never thought about looking at the chimney. I used my
binoculars, and found mortar missing from between the bricks.”

“I noticed the flashing was laying on the roof. It used
to be up against the chimney. I think this needs to be fixed.”

“It rained yesterday, and noticed a small puddle of water
in the fireplace. I think it could be coming from the chimney outside.”

These are great observations and issues with the chimney
that we can help you address and repair. If you can
see your chimney, here’s a few things to look for:

• Mortar between the
  bricks or stones have deteriorated leaving gape in between layers
• Flashing has pulled
  away from the side of the chimney, where you can see a gap
• Chimney cap is open
  allowing animals and debris to enter, or it has blown away!

If you can’t see the chimney, don’t worry. As part of your chimney sweep, our
certified technicians inspect the health of your chimney. We show you pictures
so you can see what we’re seeing.  

Now that you have the opportunity, give us a call and we’ll
take care of a chimney
sweep or chimney
repair. Remember, Superior Chimney takes your safety seriously. Read our
post, “The New
Normal Is Our Normal” to understand Superior Chimney’s best practices.

Call: 877.244.6349

This post first appeared on https://www.superiorchimney.net

Pellet stoves use innovative technology to burn wood products with such efficiency that the heating appliances are recognized by the EPA as virtually smokeless. Unlike standard wood stoves and fireplaces that burn logs and need to be tended and continuously monitored for safety’s sake, pellet stoves offer hands-free operation for up to 36 hours. These are just a couple of the benefits of using a pellet stove to cut heating costs in winter. Anyone who has one of these environmentally friendly stoves should be aware, however, of the importance of pellet stove maintenance.

How a Pellet Stove Operates

The operation of a pellet stove involves a lot more than what it takes to fire up and burn logs in a traditional stove. It’s easier to grasp the importance of pellet stove service when you know about the various components involved in the appliance’s operation, details of which follow.

Fuel Mechanism

Small pellets made of wood waste are fed into a pellet stove through a hopper in one of two ways. Some simply use gravity and others use an augur.

 

An augur is a mechanized way to feed fires with the pellet fuel. The faster the pellets are fed into the burn pot, the hotter the fire.

Combustion Chamber

The fire pot, also known as a burner ring, is in the combustion chamber. Due to the dynamics of the chamber, pellet fires don’t have the same mesmerizing, relaxing appearance of a traditional wood fire. Air that is blown into the combustion chamber ensures intense flames and very hot fires.

Heat Exchanger

A fan is part of the operation of a pellet stove, and the fan pulls in air from the room and blows it across the heat exchanger. The air is warmed to approximately 250ºF. The warmed air is then returned to the room. Electricity is required to operate the fan. If the power goes out, a pellet stove will shut down.

Pellet Stove Venting

Venting of pellet stoves doesn’t have to be through a conventional masonry chimney. Metal chimneys can be used, as well. The issue of creosote is greatly minimized due to the remarkable burn efficiency of pellet stoves. Combustion gases contain almost no particulate matter.

Why Pellet Stove Maintenance is Important

The quickest way to interfere with the tremendous efficiency of a pellet stove is to neglect annual maintenance services. The various components of a pellet stove work together for eco-friendly operation. For instance, the pressured air that is drawn into a pellet stove by the exhaust doesn’t just draw air in. Dust, dander, lint, and pet hair are continuously drawn in. The passages this debris travels through needs to be cleared routinely. Otherwise, the air is unable to circulate properly and heating efficiency is lost.

The longevity of your pellet stove is largely determined by how well the components work together, and that entire process can be hindered by the use of substandard pellet fuel. Owners of pellet stoves should understand that not all pellet fuel is recommended for use. It is essential to use only high-quality pellets. In essence, this means that the pellets contain wood waste such as sawdust and woodchips but no bark. The addition of bark greatly increases ash content and can impact the longevity of the pellet stove.

Contact Our Chimney Experts at Northeastern Chimney

Is it time for you to schedule pellet stove maintenance services? Contact the certified chimney sweep experts at Northeastern Chimney. We can help to ensure that all components of your heating appliances and venting systems are in good working order. When needed, we can provide chimney repair, chimney cleaning, masonry repair, chimney cap installation, and much more. Call us today at 860-233-5770.

This post first appeared on https://www.mychimney.com

Is your fireplace starting to get boring? Could it do with an upgrade to bring the excitement back and add some elegance in the process? Is the big problem simply that it’s not producing enough heat? If you answered yes to any of these questions, read on for some good news.

Upgrade the look of your hearth area

There are many ways to beautify a hearth area.

Fireplace mantel installation: For many people, a fireplace just isn’t complete without a stately mantel on top of it. Use your new mantel for displaying photographs, vases, antiques, kids’ artwork, mirrors, clocks – you name it.

Add a fireplace surround: The entire wall area around your fireplace can be transformed with a custom-built or factory-made fireplace surround. Choose from many beautiful materials including stone, brick, granite, wood and more.

Install glass fireplace doors: A new set of lovely glass fireplace doors will add eye-appeal to your hearth area all year long. Plus they provide a layer of protection for kids and pets after the fire dies down.

Add a set of fireplace tools: Tool sets can include a shovel, poker, brush, log-lifter and more, all displayed in a handsome stand. A decorative log holder is another idea to upgrade the look of your fireplace area.

 Upgrade your level of heat

If your fireplace upgrade plans center more around getting extra heat out of your fireplace than enhancing its appearance, consider the advantages of a fireplace insert.

With an insert, you don’t have to construct anything, because the unit fits right into your existing masonry fireplace’s firebox. Inserts are made for both wood and gas fuel, and they deliver high levels of safe, useable heat.

Heat-efficiency ratings for fireplace inserts typically range from 70% up to 85% and even higher. This rating tells you how much of the total heat the appliance produces will be available as heat within your home.

By comparison, your current masonry fireplace may not be rated any higher than 20%, and even that may be a stretch. Masonry fireplaces, while they look awesome, aren’t known as high heat producers. A gas or wood insert will not only give you the heat you want but will add significant beauty to your hearth area as you choose among the many finishes, colors, design styles and options available.

Upgrade your masonry fireplace’s performance

If you love your masonry fireplace, then give it the TLC it needs to operate safely and at peak performance. Start by scheduling an annual visit from a certified chimney sweep to remove flammable creosote and drafting obstructions from your flue. Then bring in a professional chimney inspector to evaluate the condition of your chimney and fireplace and recommend (and perform) any needed repairs. A chimney in good shape will allow the fireplace to work so much more efficiently and safely. As you can see, there’s no reason you have to keep living with a dull hearth area or an underperforming, unsafe fireplace.

High’s Chimney Service of Gaithersburg, MD, is ready to help with all your desired fireplace upgrades from appliance and mantel installation to complete inspection and chimney cleaning work. Call the trusted experts in the DC area today at (301) 519-3500.

 

The post 3 Pro Tips for a Stunning Fireplace Upgrade appeared first on Highs Chimney.

Thinking about adding a beautiful new fireplace to your home? Here are six questions to answer before you start shopping.

Do you want a brand new fireplace, or do you want to upgrade an existing masonry fireplace?

Many people shop for new fireplaces because they’re tired of trying to heat their homes with their existing masonry fireplace. If you really like your current fireplace, a new fireplace insert might be the right move. Inserts fit right into your masonry fireplace’s firebox and can run on gas or wood. With a fireplace insert, you don’t have any construction to undertake and you get to keep enjoying your old, familiar fireplace.

If it’s a new fireplace, where do you want it installed?

Modern zero-clearance (ZC) fireplaces are factory-built and can be installed in just about any wall in your home. Heavily insulated, ZC fireplaces are available in wood and gas models.

It pays to put a little thought into where you want to install your new fireplace to make sure you get the most out of its beauty and heat production. Your fireplace installation technician will help you with this decision.

How much heat do you want?

Both fireplace inserts and zero-clearance fireplaces come with a range of heat-efficiency ratings, which measure the total heat produced by the appliance vs. how much of that heat will be available for your home as opposed to going up the chimney. The size of the area you’ll be heating is the main factor in choosing the level of heat required from your new fireplace. You don’t want an ultra-powerful fireplace in a 10” X 15” room, nor do you want a smaller, more economical model if you need to heat 800 or more square feet.

What’s the ideal look for your new fireplace?

ZC fireplaces and fireplace inserts from top makers come in an attractive range of shapes, finishes, colors and design styles. From sleek and contemporary to traditional and rustic, you can choose the perfect look to compliment your home’s décor.

What’s the ideal fuel?

Many people love wood-burning fireplaces. Many other people don’t like the extra work involved in running a wood fireplace, so they go with gas. Choosing the ideal fuel for your new fireplace really comes down to how much you want to be involved in the process of running the appliance. Wood fires are nostalgic and aggressive, but wood needs to be bought, stored and loaded into the firebox. Gas fires start instantly and are easy to control, and very little maintenance is required. But they won’t give you quite the same traditional look and aroma as burning logs.

How much maintenance do you want to do?

As noted above, wood fireplaces require a little more work than gas fireplaces. Any wood-burning appliance causes creosote to form in the vent system. Creosote is flammable and needs to be professionally cleaned at least once a year. Also, wood can be messy, and you’ll have to deal with ashes, soot and wood chips as part of regular maintenance. Gas fireplaces, on the other hand, are by nature very clean. If you’re the type who likes to enjoy a fireplace but isn’t interested in messing with it, a new gas insert or fireplace is ideal for you.

Fluesbrothers Chimney & Fireplace of Kansas City, KS, can help you decide on the perfect new fireplace or fireplace insert for your home. Our experienced technicians will then install your appliance safely and correctly. Get on the road to more heat by calling (913) 236-7141.

The post 6 Questions to Answer Before Buying a New Fireplace appeared first on Fluesbrothers Chimney Service.

With fireplaces being among the most desirable feature home buyers want, home builders are now offering fireplaces as a standard or optional feature in many new homes. These fireplaces are generally built using builder-grade materials. Builder grade materials are considered medium quality, a step up from economy-grade, the lowest quality on the grading scale. It uses mass-produced, lesser quality materials designed to replicate a custom-made fireplace at a lower price-point for the builder. Many homeowners who have a builder-grade fireplace discover that they will eventually need to upgrade or replace it within a few years.

Shorter life span

Builder grade fireplaces are usually constructed using plywood or fiberboard instead of higher quality, more durable wood finishing. The standard quality materials are often mass-produced in a factory and assembled on-site. While builder-grade are the most popular materials in homes today, they lack the durability of semi-custom or custom grade fireplaces that use higher quality materials. As a result, the builder-grade fireplace will need to be replaced within 5 to 10 years, depending on usage.

Lower heat output

Most builder-grade fireplaces are built mainly for aesthetics, not as a primary heating source. They often lack the performance of a custom fireplace due mostly to the lower quality combustible materials in its construction. On cold days you may find that you’re using central heating more often than you would like. Therefore, you will notice an increase in heating costs.

Limited designs

Homebuyers often have limited design options when purchasing a home with a builder-grade fireplace. Depending on the builder or contractor, you may not have a choice, or you may have to choose among two to three standardized designs that don’t match your taste.

A higher quality fireplace

Whether you are building a new home or installing a new fireplace into an existing home, you don’t have to settle for a builder grade fireplace.  Consult with your local hearth dealer to discuss your home heating needs. They will work directly with you or your general contractor to install a higher quality fireplace that is best for your home and budget.

Fireplace installation

When working with your local hearth dealer to install a fireplace into a new or existing home, you will be able to choose a fireplace that will suit your taste and complement your home décor. You will also have the option of selecting the type of fireplace, such as traditional masonry, fireplace insert, or prefab, for example. Instead of being limited to a single fuel source, choosing your fireplace gives you the freedom to decide if you prefer a wood-burning, gas, or pellet fuel experience.
Rather than limiting your option to a builder grade fireplace, choose a higher quality, longer-lasting fireplace for your home. You will enjoy a top-performing, more energy-efficient fire-burning experience that will warm your home for years to come.

The post Why You Shouldn’t Settle for a Builder Grade Fireplace appeared first on Fluesbrothers Chimney Service.